Table of Contents
Advertisement
V
I
-
1
-
4
U
V
I
-
1
-
4
U
This page allows you to set new password for user operation.
Available settings are explained as follows:
Item
Enable User Mode for
simple web configuration
Password
Confirm Password
Password Strength
Set to Factory Default
When you click OK, the login window will appear. Please use the new password to access into
the web user interface again. Below shows an example for accessing into User Operation with
User Password.
1. Open System Maintenance>>User Password.
2. Check the box of Enable User Mode for simple web configuration to enable user mode
operation. Type a new password in the field of New Password and click OK.
320
s
e
r
P
a
s
s
w
o
r
d
s
e
r
P
a
s
s
w
o
r
d
Description
After checking this box, you can access into the web user
interface with the password typed here for simple web
configuration.
The settings on simple web user interface will be different
with full web user interface accessed by using the
administrator password.
Type in new password in this field. The length of the
password is limited to 31 characters.
Type in the new password again.
Display the security strength of the password specified
above.
Click to return to the factory default setting.
Vigor2133 Series User's Guide
Hide quick links:
Advertisement
Table of Contents
