Wlan/Bluetooth Combo Card - HP EliteBook 1050 G1 Maintenance And Service Manual

WLAN/Bluetooth combo card

Description
Intel Wireless-AC 9560 802.11ac 2x2 WiFi + BT 5 Combo Adaptor (vPro)
Intel Wireless-AC 9560 802.11ac 2x2 WiFi + BT 5 Combo Adaptor (non vPro)
Before removing the WLAN module, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
Remove the WLAN module:
1. Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module.
NOTE:
The WLAN antenna cable labeled '2' connects to the WLAN module 'Aux' terminal labeled '2'. If the
computer is equipped with an 802.11a/b/g/n WLAN module, the yellow WLAN antenna cable connects to
the middle terminal on the WLAN module.
2. Remove the Phillips M2.0×2.0 screw (2) that secures the WLAN module to the computer. (The edge of
the module opposite the slot rises away from the computer.)
Bottom cover on page
Battery on page
The WLAN antenna cable labeled '1' connects to the WLAN module "Main" terminal labeled '1'.
29).
31).
Component replacement procedures
Spare part number
L32652-005
L32650-005
37