Configuration (Dmx); Dmx Personalities And Starting Address - Chauvet DJ COLORband HEX 9 IRC User Manual

Configuration
(DMX)
DMX
Personalities
and Starting
Address
Page 10 of 20
Set the product in DMX mode to control with a DMX controller.
1. Connect the product to a suitable power outlet.
2. Turn the product on.
3. Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
The COLORband™ Hex 9 IRC uses up to 23 DMX channels in its 23-channel DMX
mode, which defines the highest configurable address to 490.
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that is too high, you could
restrict the access to some of the product's channels.
If you are not familiar with the DMX protocol, you may refer to the DMX Primer at
www.chauvetlighting.com.
To select the DMX personality, do the following:
1. Press <MENU> repeatedly until 6-CH, 9-CH, 11CH, 18CH, or 23CH shows on the
display.
2. Press <ENTER> to choose your DMX personality when it appears on the display.
To then choose your starting address:
1. The display should show d 1 once you've selected your DMX personality using the
steps above.
2. Use <UP> or <DOWN> to select the starting address.
3. Press <ENTER>.
COLORband™ Hex 9 IRC User Manual (Rev. 1)