Technical Information; Product Maintenance - Chauvet DJ COLORband HEX 9 IRC User Manual

5. T
ECHNICAL
Product
Maintenance
COLORband™ Hex 9 IRC User Manual (Rev. 1)
I
NFORMATION
Dust build up reduces light output performance and can cause overheating. This can
lead to reduction of the light source's life. To maintain optimum performance and
minimize wear, you should clean your lighting products at least twice a month. However,
be aware that usage and environmental conditions could be contributing factors to
increase the cleaning frequency.
To clean the product, follow the instructions below:
1. Unplug the product from power.
2. Wait until the product is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust
collected on the external surface/vents.
4. Clean all external optics/lenses and glass/transparent surfaces with a mild soap
solution, ammonia-free glass cleaner, or isopropyl alcohol.
5. Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning
tissue.
6. Softly drag any dirt or grime to the outside of the external optics or
glass/transparent surface.
7. Gently polish the external optics and glass/transparent surfaces until they are
free of haze and lint.
Always dry the external optics and glass/transparent surfaces carefully after
cleaning them.
Page 17 of 20