Using Call Waiting - Uniden WHAMx4 Owner's Manual

WHAMx4 Paper OMNEW.fm Page 25 Thursday, January 27, 2005 2:34 PM
NOTE: The user can press any key on the
WHAMx4 or the PTT key to deactivate this feature.
When this mode is activated the WHAMx4 will
receive quick beep tones indicating that a call is
coming in. The WHAMx4 will automatically reply to
the call on channel 70 and then return to the work-
ing channel with the screen shown directly above.

Using Call Waiting

This feature allows the user to view a list of received
calls that came into the WHAMX4 while either in
STANDBY mode or if a call timed out after 5 minutes
and went into the Call Wait log.
Starting from the Channel display mode, the user
will press the Menu key and the following screen will
appear.
Press the Down or Up arrow keys to display the
CALL WAIT option. The following screen will be dis-
played.
Press the Select key and the following screen will
give the user three options to view the logged mes-
sages, DISTRESS, INDIVIDUAL, or the EXIT
option. By using the DOWN and UP arrow keys, the
WHAMx4 will display the desired choice.
From this screen, the user can press the SELECT
key and use the DOWN and UP arrow keys to scroll
through the logged calls.
The user can then press the SELECT key to get fur-
ther information about the call that came in.
NOTE: If the call that is being viewed in the log
came in without GPS information, the user will press
in on the SELECT key.
Operation 25