Using Select/Scram; Using Hail/Intercom - Uniden WHAMx4 Owner's Manual

WHAMx4 Paper OMNEW.fm Page 18 Thursday, January 27, 2005 2:34 PM

Using Select/SCRAM

Pressing this key briefly while in the Menu mode will
select the menu items. Pressing and holding this
key will activate the Scramble mode for the selected
channel. Briefly pressing this key during the normal
channel operation mode, will activate the following
scrolling information : Current Local Time, Current
Position (Latitude/Longitude), SOG (Current Speed
Over Ground, and COG (Current Course Over
Ground). Pressing this key briefly again will deacti-
vate the scrolling information and return the display
to show the current channel name.
*NOTE: The channel mode display information will
be the priority and will be displayed whenever the
radio receives an incoming transmission or when
the radio is transmitting. The user can also toggle
back and forth between the two displays by pressing
the SELECT key from the channel display screen.

Using HAIL/INTERCOM

Pressing this key briefly will activate the Hailer fea-
ture. To adjust the outgoing volume, press the UP
arrow key to increase and the DOWN arrow key to
decrease. To adjust the incoming Hail volume,
briefly press the Volume key, then the UP arrow key
to increase and the DOWN arrow to decrease. The
following screen shows the Hailer mode. Press the
Hail key again briefly to exit the Hail mode.
Press the select key or the PTT key to choose the
Hailer mode.
Press and hold the Hail key for ~2 seconds to acti-
vate the Intercom feature. The user can now choose
Operation 18