Adjusting The Key Beep - Uniden WHAMx4 Owner's Manual

WHAMx4 Paper OMNEW.fm Page 34 Thursday, January 27, 2005 2:34 PM
when, using the WHAMX4 DOES NOT affect the
contrast setting on the main radio or other WHAMX4
units that may be operational on the system. This
feature will use the DOWN and UP arrow keys to
change the contrast level on the LCD screen. The
contrast will change on the LCD will be shown in the
channel area of the display. Pressing the UP arrow
key will increase the contrast. Pressing the DOWN
arrow key will decrease the amount of contrast.
Once the contrast level appears to the users' satis-
faction, the SELECT key will be pressed and the
radio will return to the channel display screen. Upon
returning to the channel display screen all informa-
tion will be the same as it was before the user
entered the menu system.
NOTE: This function needs to have a reset in case
the LCD screen becomes unreadable due to envi-
ronmental changes. The default setting should be
level four of seven on the LCD. To reset all of the
features to the factory settings the user will hold in
the Menu key while turning the radio on. THIS
WILL NOT RESET THE MMSI.

Adjusting the Key Beep

This feature will allow the user to turn on or off the
key beep tones. From the SETUP Menu, press the
DOWN or UP arrow keys until the following screen
is displayed.
Pressing the SELECT key will accept this setting
and return the radio to the System menu.
Operation 34