Uniden WHAMx4 Owner's Manual page 22

WHAMx4 Paper OMNEW.fm Page 22 Thursday, January 27, 2005 2:34 PM
Starting from the Channel display mode, the user
will press the Menu key and the following screen will
appear.
Press the SELECT key and use the DOWN / UP
keys to display the following screen.
Press the SELECT key to send the GROUP call. Or
scroll down to Exit, then press SELECT to exit back
to the radio mode. By pressing the MENU key while
in this menu will return the radio to the DSC CALL
menu. When the GROUP CALL has been sent, the
following screen will be displayed until either a radio
in the group presses their PTT button or the call
times out after 5 minutes.
Using ALL SHIPS
This function will be used to send a message to all
ships. There will be three types of transmissions
that may be sent, URGENCY, SAFETY, ROUTINE.
Starting from the Channel display mode, the user
will press the Menu key.
Press the SELECT key and the DOWN or UP arrow
keys until the ALL Ships menu option is displayed .
The user will then use the DOWN or UP keys to
select the option call type that they wish to send.
Once the desired option is highlighted, the user will
press the SELECT key to send the call. Upon send-
ing the call the WHAMx4 will display the channel
mode screen with channel 70 showing. The radio
will go to the specified channel above based upon
the type of call that is being made. (Either 16 or the
channel that the transmission was made from).
Operation 22