Programming The Instant Priority Channel; Recalling The Instant Channel; Transmitting; Call Function - Uniden UH7760NB Owner's Manual

Operation

Programming the Instant Priority Channel

Press /
Channel you prefer. Press and hold [INST]
button on the microphone for 2 seconds to
store the new setting. INST icon appears.

Recalling the Instant Channel

Momentarily press the [INST] button on
the microphone at any time to return to
the Instant Channel. Press [INST] again to
return to the previous channel.

Transmitting

The UHF CB Radio uses up to 77 UHF-CB Channels.
For your reference a list of the available channels,
corresponding frequencies and guidelines for their use and
selection is printed on p.27 - p.29. For Australia, Channels
NOTE
05 and 35 are reserved for Emergency Calls.
Select the desired channel. Press the microphone's [PTT] button and
speak normally into the microphone. Hold it approx. 7cm from your mouth.
Release the [PTT] button to end the transmission and listen for a reply.

Call Function

Press the microphone [CALL] Button. A three second ringing tone
will be transmitted.
You may select from 5 types of tones (see p.21).
Current regulations require calling tones to be restricted to
one transmission per minute. If a second transmission is
attempted within one minute then an error tone will sound.
NOTE
UNIDEN UH7760NB
to select the Priority
PTT
15
Remote SPK/MIC UHF Mobile Radio
CALL INST