Smartbox Grid Pad Manual page 70

In Grid 3 highlight your newly named button and select Transmit A.
On your EasyWave socket, press the button three times. This will
return the device to operating mode. You can tap now Transmit A
to toggle the switch on and Transmit B to switch it off.
Adding the paired socket to an accessory
Once your socket has been paired, you can assign it to an
accessory and use it in the Servus Environment Control grid sets.
In Settings – Environment control, tap Add under Accessories.
From the Add accessory window select Socket and tap Next.
You can now give the accessory a name. This is useful if you are
using more than one at the same time. In this example, the socket
is controlling a desk fan.
70