Setting Up A Radio Device - Smartbox Grid Pad Manual

Setting up a radio device

5.5
To use an EasyWave or Z-Wave radio device, you must first pair
it with your Grid Pad and then configure how it behaves. In the
following example we are using an EasyWave socket, however the
same instructions apply for Z-Wave devices.
Pairing an EasyWave socket
Go to Settings – Environment control and select Transmitters.
Highlight EasyWave and tap Configure.
You will need to assign a button to the socket. Select one of the
buttons from the menu and click Rename. This will be helpful if you
are going to be using more than one socket. Give the button a
recognisable name and tap enter.
Plug your EasyWave socket into a mains socket and press the
button once to enter training mode. The LED will flash in a steady
pattern.
69