Voice Activation And Access - Smartbox Grid Pad Manual

4.5

Voice activation and access

You can use your voice to access Grid 3. This requires an
additional microphone or headset to be connected to your Grid
Pad. We recommend a USB or Bluetooth microphone or headset.
Once configured, voice commands are activated by speaking the
wake-up phrase "Hey Grid 3..." followed by the text on the cell you
desire.
Configuring voice access
The settings to configure voice access are found in Settings –
Access – Voice. From this screen you can select the microphone
you wish to use by tapping the Audio input under Microphone.
Once you have selected your microphone we recommend that you
use the Configure tool, followed by Improve accuracy to read out
several test sentences.
You can set the "Hey Grid 3..." wake-up phrase to anything
you like, and adjust the length of time you need to issue your
commands once the wake-up phrase has been activated.
You can also choose to have a sound after the wake-up phrase
has been activated, and once your selection has been made.
50