Installing The Reliability Monitoring Device - ABB RMDE-01 Product Manual

20 Mechanical installation
• Support plates for sensors
• Sensors with USB cables
• Cable glands.
Before attempting the installation and operation, check the information on type designation
label to verify that the delivery is of the correct type. See section
label (page 17).

Installing the reliability monitoring device

1. Select the appropriate mounting location for RMDE-01.
• See section Ambient conditions (page
• Make sure there is 500 mm clearance on both sides of the enclosure for cooling.
WARNING!
RMDE-01 is a heavy device. Be careful when you lift it.
2. Install the mounting brackets to the enclosure.
3. Mount the enclosure using M8 bolts and washers.
Example of type designation
47).