Protection Classes; Materials - ABB RMDE-01 Product Manual

48 Technical data
Ambient conditions
Contamination levels
(IEC 60721-3-x)
Chemical gases
Solid particles
Pollution degree
(IEC/EN 61800-5-1)
Atmospheric pressure
Vibration
(IEC 60068-2)
Drop (ISTA)

Protection classes

Protection classes
Degree of protection (IEC/EN 60529)
Enclosure type (UL50, NEMA 250)
Over voltage category (IEC 60664-1)
Protective class (IEC/EN 61800-5-1)

Materials

Materials Descriptions
Enclosure Enclosure steel sheet 1.38 mm
Door 1.5 mm
Mounting plate 2.5 mm
Enclosure and door dipcoat primed, powder-coated on the outside
Mounting plate zinc-plated
Enclosure color RAL 7035
Package Cardboard and foam cushions PE
Operation
IEC 60721-3-3:2002: Clas-
sification of environmental
conditions.
Part 3-3: Classification of
groups of environmental
parameters and their
severities.
Stationary use of weather
protected locations.
Class 3C2
Class 3S2
No conductive dust al-
lowed.
Pollution degree 2
70...106 kPa
Maximum 1 mm; 5...13.2
Hz
2
Maximum 7 m/s ;
13.2...150 Hz sinusoidal
-
Storage
IEC 60721-3-1:1997
Class 1C2
Class 1S3
Packing must support this,
otherwise 1S2.
-
70...106 kPa
Maximum 1 mm; 5...13.2
Hz
2
Maximum 7 m/s ;
13.2...150 Hz sinusoidal
RMDE-01 (ISTA 1A): Drop,
6 faces, 3 edges and 1
corner.
Values
IP 54
4
II
I
Transportation
IEC 60721-3-2:1997
Class 2C2
Class 2S2
-
60...106 kPa
Maximum 3.5 mm; 2...9 Hz
2
Maximum 15 m/s ; 9...200
Hz sinusoidal
-