Intrusion | Troubleshooting | G100 Z-Wave gateway
Flash pattern
Flashes slowly (once every sec)
Flashes 1000 ms on, and then 300 ms off
Flashes 150 ms on, and then 100 ms off
ON Steady
OFF
Flash pattern
Flashing rapidly (40 ms on, and then 40 ms off)
OFF
Bosch Security Systems, Inc. • 130 Perinton Parkway • Fairport, NY 14450 •
Z-Wave (orange) LED descriptions
Function
Indicates the gateway has confirmed the inclusion or exclusion of
a device.
Indicates the gateway is in inclusion mode.
Indicates the gateway is in exclusion mode
Indicates the module has booted up, and is ready for use.
Indicates the module is not powered up, or there is a failure in the
module. Check for proper installation.
Error (red) LED descriptions
Function
Indicates a Z-Wave error.
Indicates a normal state.
| 5
us.boschsecurity.com
| 2015.02 | v1