Advertisement
Intrusion | Troubleshooting | G100 Z-Wave gateway
Advanced diagnostics
The G100 gateway includes LEDs for troubleshooting and status.
Flash pattern
Flashes once every 1 sec
Flashes 500 ms on, and then 200 off
Flashes 200 ms on, and then 200 ms off
ON Steady
OFF
Flash pattern
Flashes once every 1 sec
Flashes fast (40 ms on, and then 40 ms off)
ON Steady
OFF
Bosch Security Systems, Inc. • 130 Perinton Parkway • Fairport, NY 14450 •
Power (blue) LED descriptions
Function
Indicates the module is booting up, resetting to factory defaults,
or resetting the network.
Indicates the module is syncing with the servers over the internet.
Indicates the module is downloading a file from the server. This
occurs only during a firmware upgrade.
Indicates the module has booted up, and is ready for use.
Indicates the module is not powered up, or there is a failure in the
module. Check for proper installation.
WAN (green) LED descriptions
Function
Indicates the gateway is booting up, resetting to factory defaults,
or resetting the network.
Indicates the gateway did not obtain the IP address from the
broadband router, or does not have an internet connection.
Indicates the gateway has an internet connection.
Indicates the gateway is not powered up, or there is a failure in
the gateway. Check for proper installation.
| 4
us.boschsecurity.com
| 2015.02 | v1
Advertisement
Troubleshooting
