NEC Express5800/R120f-1M Maintenance Manual page 73

Chapter 2 Useful Features
(a) PCI Device Controller and Option ROM Settings submenu
For details about the options, see the table below.
VGA Controller
VGA Priority
LAN Controller
LANX Option ROM Scan
PCIXX Slot Option ROM
Option
Disabled
[Enabled]
[Offboard]
Onboard
Disabled
[Enabled]
Disabled
[Enabled]
Disabled
[Enabled]
Note
If no hard disk drive on which an OS is installed is connected to a RAID Controller,
LAN card (network boot), or Fibre Channel controller, set the option ROM for that
slot to "Disabled".
Express5800/R120f-1M, R120f-2M Maintenance Guide
Parameter
Enable or disable the onboard VGA controller.
This option is automatically set to "Enabled" if
only the onboard VGA controller is valid.
Specify priority to expand ROM of VGA
controller. This option can be selected only
when "Legacy" is specified for Boot Mode.
Enable or disable the onboard LAN controller.
This option is fixed to "Enabled" if Shared
LAN is set to "Enabled" for off-line tools.
Enable or disable the option ROM SCAN for
onboard LAN. This option is displayed
according to the number of LAN ports.
"Disabled" is selected for any other LAN ports
than LAN1.
Enable or disable the option ROM on each
PCI slot. "Enabled" is selected for PCI1A only.
R120f-1M
R120f-2M
1. System BIOS
Description
XX:1A/1C/1D
XX:1A/1C/2C/3C/1D/2D/3D
[ ]: Factory setting
73