NEC Express5800/R120f-1M Maintenance Manual page 161

Chapter 3 Appendix
Applications and Services Logs
Microsoft-Windows-
DeviceSetupManager
200
When running the system
Microsoft-Windows-
DeviceSetupManager
201
When running the system
Microsoft-Windows-
DeviceSetupManager
202
When running the system
Microsoft-Windows-
AppReadiness
215
When installing an OS
Windows Server 2012
System Log
b57nd60a
4
When installing an OS, booting the
system, or applying Starter Pack
l2nd
4
When booting the system or applying
Starter Pack
l2nd
4
When installing an OS, starting system,
or applying Starter Pack
mlx4_bus
24
When starting system with
N8104-146/147 (InfiniBand board)
connected
Warning A connection to the Windows Update Services could not be established.
If this event is not registered after the Internet connection is established,
there is no problem in system operation.
A connection to the Windows Metadata and Internet Services (WMIS)
Warning
could not be established.
If this event is not registered after the Internet connection is established,
there is no problem in system operation.
Warning The Network List Manager reports no connectivity to the internet.
If this event is not registered after the Internet connection is established,
there is no problem in system operation.
'ART:ResolveStoreCategories' of Administrator failed.
Error
Error: 'Class not registered' (0.0469065 sec.)
If this event is logged only at the first sign-in after OS installation and
does not occur repeatedly, there is no problem in system operation.
Broadcom NetXtreme Gigabit Ethernet #xx: The network link is down.
Warning
Check to make sure the network cable is properly connected.
There is no problem in system operation.
Broadcom BCM57800 #xx: The network link is down.
Warning
Check to make sure the network cable is properly connected.
There is no problem in system operation.
Broadcom BCM57810 #xx: The network link is down. Check to make
Warning
sure the network cable is properly connected.
There is no problem in system operation.
MLX4_SF_32_0_0:
Problem - The port was configured to use auto sensing for deciding the
port type. The port * failed to detect the port type automatically.
Impact - As a result the port is started as IB port (unless the port is
ETH only). This may cause a connection problem if the other side is
Warning
ETH port.
Reason and suggestion to fix - This problem may happen since the
computer is connected back to back or the cable is unplugged.
For solving this issue connect the port to a switch or define the port type
explicitly (IB or ETH) instead of auto.
If Auto Negotiation fails in InfiniBand connection environment (e.g.,
InfiniBand cable is not connected), the port works as IB port. Thus, this
event does not affect system operation.
Express5800/R120f-1M, R120f-2M Maintenance Guide
2. List of Windows Event Logs
161