Removal And Replacement Preliminary Requirements; Tools Required; Service Considerations; Plastic Parts - HP ENVY 13 Maintenance And Service Manual

4 Removal and replacement preliminary
requirements

Tools required

You will need the following tools to complete the removal and replacement procedures:
Flat-bladed screw driver
●
Magnetic screw driver
●
Phillips P00 and P0 screw drivers
●
Torx5 screw driver
●

Service considerations

The following sections include some of the considerations that you must keep in mind during disassembly and
assembly procedures.
NOTE: As you remove each subassembly from the computer, place the subassembly (and all
accompanying screws) away from the work area to prevent damage.

Plastic parts

CAUTION:
handling the plastic parts. Apply pressure only at the points designated in the maintenance instructions.
20 Chapter 4 Removal and replacement preliminary requirements
Using excessive force during disassembly and reassembly can damage plastic parts. Use care when