Winnebago Travato 2019 Operator's Manual page 86

SECTION 9 –
FURNITURE AND SOFTGOODS
Bed Conversion
1. Remove dining table from storage location
(attached by latch on passenger side twin bed
cabinet. Set aside.
2. Slide the two (2) bed extension support bars
(located on the face of the driver side twin bed
cabinet) to align with the notch on the
passenger side twin bed cabinet.
9-4
Lift latch to remove
table
3. Remove one (1) bed extension support bar
from beneath passenger side twin bed cabinet.
Attach support bar to the notches on the bed
cabinet as shown.
4. Place table top onto the support bars making
sure the notch on the bottom of dining table
aligns to the support bar.
5. Arrange bed cushions to cover bed area.