Subscribe to Our Youtube Channel
Related Manuals for Ozito TSB-0808U
Summary of Contents for Ozito TSB-0808U
- Page 1 TSB-0808U Original operating instructions Bench-type circular saw Art.-Nr.: 43.404.20 I.-Nr.: 11016 Anl_TSB_0808U.indb 1 Anl_TSB_0808U.indb 1 07.04.2017 10:03:02 07.04.2017 10:03:02...
- Page 2 - 2 - Anl_TSB_0808U.indb 2 Anl_TSB_0808U.indb 2 07.04.2017 10:03:03 07.04.2017 10:03:03...
- Page 3 - 3 - Anl_TSB_0808U.indb 3 Anl_TSB_0808U.indb 3 07.04.2017 10:03:05 07.04.2017 10:03:05...
- Page 4 - 4 - Anl_TSB_0808U.indb 4 Anl_TSB_0808U.indb 4 07.04.2017 10:03:09 07.04.2017 10:03:09...
-
Page 5: Table Of Contents
Table of contents 1. Safety regulations 2. Layout and items supplied 3. Proper use 4. Technical data 5. Before starting the equipment 6. Assembly 7. Using the saw 8. Operation 9. Replacing the power cable 10. Cleaning, maintenance and ordering of spare parts 11. - Page 6 Danger! - Read the operating instructions to reduce the risk of inquiry. Caution! Wear ear-muff s. The impact of noise can cause damage to hearing. Caution! Wear a breathing mask. Dust which is injurious to health can be generated when working on wood and other materials.
-
Page 7: Safety Regulations
Danger! 2.2 Items supplied When using the equipment, a few safety pre- Please check that the article is complete as spe- cautions must be observed to avoid injuries and cifi ed in the scope of delivery. If parts are missing, damage. -
Page 8: Technical Data
4. Technical data Please note that our equipment has not been de- signed for use in commercial, trade or industrial applications. Our warranty will be voided if the AC motor ........230V ~ 50Hz machine is used in commercial, trade or industrial Power P ........ -
Page 9: Before Starting The Equipment
Wear ear-muff s. sure that the saw blade is correctly fitted and The impact of noise can cause damage to hea- that the machine’s moving parts run smoothly. ring. Keep the noise emissions and vibrations to a 6. Assembly minimum. •... -
Page 10: Operation
make a trial cut in order to check the set di- 6.4 Replacing the table insert (Fig. 4) mensions. • Important: Pull out the power plug! 7.2.2 Cutting width (Fig. 8) • • Remove the screws (23). The parallel stop (7) has to be used when •... - Page 11 There are no parts inside the equipment which require additional maintenance. 10.3 Spare parts: Spare parts can be ordered from the Special Orders Desk at your local Ozito-diy.co.uk Bunnings Warehouse or Homebase store. For further information, or any parts visit www.ozito-diy.co.uk...
- Page 12 For EU countries only Never place any electric power tools in your household refuse. To comply with European Directive 2012/19/EC concerning old electric and electronic equipment and its implementation in national laws, old electric power tools have to be separated from other waste and disposed of in an environment-friendly fashion, e.g.
- Page 13 Service information Please note that the following parts of this product are subject to normal or natural wear and that the following parts are therefore also required for use as consumables. Category Example Wear parts* V-belt, carbon brushes, table insert, push stick Consumables* Saw blade Missing parts...
- Page 14 - Damage to the device or parts of the device caused by normal or natural wear or tear or by normal use of the device. OZITO UK Unit 9 Stadium Court, Wirral International Business Park, Plantation Road, Bromborough, Wirral, CH62 3QG - 14 - Anl_TSB_0808U.indb 14 Anl_TSB_0808U.indb 14...
- Page 15 ISC GmbH · Eschenstraße 6 · D-94405 Landau/Isar explains the following conformity according to EU directives and norms for the following product Table Saw TSB-0808U (Ozito) 2014/29/EU 2006/42/EC Annex IV 2005/32/EC_2009/125/EC Notifi ed Body: TÜV Product Service Gmbh 2014/35/EU Notifi ed Body No.: 0123 Reg.
- Page 16 EH 04/2017 (01) Anl_TSB_0808U.indb 16 Anl_TSB_0808U.indb 16 07.04.2017 10:03:12 07.04.2017 10:03:12...
Need help?
Do you have a question about the TSB-0808U and is the answer not in the manual?
Questions and answers