Planet Networking & Communication XRT-501 Quick Installation Manual page 6

Parameter
3.1 Cable Modem
3.2 DSL/ADSL
3.3 Telstra
Bigpond Cable
3.4 SingTel RAS
3.5 Other
Click on one of the WAN types and then proceed to the manual's relevant sub-
section (3.1, 3.2, 3.3, 3.4 or 3.5). Click on Back to return to the previous
screen.

Your ISP will automatically give you an IP address.
Your ISP requires you to use an xDSL over Ethernet
connection.
For Telstra BigPond (Australia) use only.
For SingTel RAS (Singapore) use.
You can directly to setup the ISP type with Specified
(Fixed) or Dynamic IP Address
Description