L2Tp - Planet Networking & Communication XRT-501 Quick Installation Manual

3.2.3 L2TP

Select L2TP if your ISP requires the L2TP protocol to connect you to the Internet.
Your ISP should provide all the information required in this section.
Parameter
Specify L2TP Server Name or IP address that you want to
L2TP Sever
connect to.
Login User Enter the User Name provided by your ISP for the L2TP
Name connection.
Login Enter the Password provided by your ISP for the L2TP
Password connection.
Connect Select the connection behaviors that you wish it be to
behavior Automatic Connect, Manual Connect, or Keep alive.
Auto- You can specify an idle time threshold (seconds) for the WAN
disconnect port. This means if no packets have been sent (no one using
Timeout the Internet) during this specified period, the router will
period automatically disconnect the connection with your ISP.
Description
11