Runco CINEWIDE VX-6000D Installation & Operation Manual page 44

Installation
Install Ceiling Mount Adapters/Projector Stands: For ceiling installations, the
adapters bring the attachment points for the projector mounting rails (included with the
projector ceiling mount kit) from the bottom of the projector up and around the AutoScope
lens motor housing. For floor installations (where the projector is upright), the adapters
allow the projector to lie flat on the mounting surface.
Using six (6) each of the supplied, 10-32 x 1/2" Pan-Head Phillips screws (item #2), attach
the AutoScope Ceiling Mount Adapters/Projector Stands (items #3 and #4) to the
projector as shown in Figure 3-8.
Figure 3-8. VX-6000d with Ceiling Mount Adapters/Projector Stands
DO NOT OVER-TIGHTEN THE SCREWS.
Caution
28 Runco VX-6000d Installation/Operation Manual