Dhd Controller Rear Panel; Outputs - Runco CINEWIDE VX-6000D Installation & Operation Manual

7. RIGHT BUTTON
Used to direct-select inputs or move the menu cursor right in the OSD. When no
menus are present on-screen, the RIGHT button toggles through the different
sources, in this order:
Composite Video - S-Video 1 - S-Video 2 - Component - HD 1 - HD 2 - SCART -
HDMI 1 - HDMI 2
8. MENU BUTTON
Press the MENU button to bring up the main menu, or to exit the current menu and
return to the previous one.
9. UP BUTTON
Use to direct-select aspect ratios or move the menu cursor up in the OSD. When no
menus are present on-screen, the UP button toggles through aspect ratios in the
following order:
Native - Virtual Cinema - Cinema - VirtualWide - Letterbox - 4:3 - 16:9
10. ENTER BUTTON
When an item is highlighted on the OSD, the ENTER button selects the item.
11. STANDBY LED
Lights amber when the DHD Controller is in standby mode; otherwise it is off.
Figure 2-4 shows the rear connector panel on the DHD Controller.
13 12
14
Figure 2-4. DHD Controller Rear Panel
1. HDMI Out
Connect this to the HDMI connector on the VX-6000d (see Figure 2-2).
2. Display Control
Connect this to the RS-232 port on the VX-6000d, using the provided
communication cable.
3. TRIGGERS
Connection for up to three (3), 12-volt trigger-controlled devices. Output current is
limited to 250 milliamperes (mA).
Runco VX-6000d Installation/Operation Manual
5
1 4
3
6
9
Controls and Functions
2.4
DHD Controller Rear
Panel
11 2 10
7 8

Outputs

9