Turning Off The Power - Runco Reflection CL-710 Owner's Operating Manual

Runco CL-710/ CL-710LT User's Manual

Turning off the Power

Press the OFF key on the remote control to turn
off the unit.
The POWER LED will blink green and the fans will
speed up for a quick cool down. The projector
will not respond to any command for 90 seconds.
The POWER LED will light solid orange once the
cooling down cycle has completed.
After turning off the unit, the POWER LED will
blink green and the fans will operate at high speed
for 90 seconds.
Fans will run for three minutes to cool.
You may turn the projector back on after the first
90 seconds.
21
4. Basic Operation