Jensen JTA-990 User Manual page 27


Check that there are no loose layers of tape visible through the cassette center window (see
Fig. 1). Take up any loose layers, using a pencil or hexagonal barrelled ballpoint pen, before
inserting the cassette into the machine (see Fig.2).

If the cassette feels tight while performing operation shown (see
Fig.2), the tape may be jamming due to ridges formed in the
winding of the tape (visible through the center window). These may
be removed, in most cases, by fast winding of the cassette from
one end to the other and back again.

Use only well-known brands of tape. Avoid use of C-120 cassettes.
Furthermore, do not expose cassettes to direct sunlight, dust or oil,
and do not touch the tape surfaces.
RECORD CARE AND MAINTENANCE
To ensure the best sound and the least amount of wear on your records, it's essential that they
are kept clean. Make sure your records, especially older ones, are sufficiently cleaned prior to
playing them.
Thoroughly clean dust off the stylus and record regularly.

Use a soft brush to clean the stylus. Brush from the base to the tip as shown below.

For records with only light amounts of dust, we recommend brushing them off with a carbon
fiber brush or velvet pad before playing them. Use a good quality record cleaner and brush
set to keep your records clean. Carbon fiber brushes, velvet pads and record cleaning kits
are available online or in local record stores.

Using a mild dish soap and warm water for washing your records will also help remove
excess dirt and dust that builds up over the years. Use a microfiber cloth when washing and
wiping off any excess water from the records once they have been cleaned
NOTE:
Remember, the best cleaning in the world just removes all the dust and dirt. Some
records will have scratches and groove wear. No amount of cleaning will fix this. So after
cleaning, some records may sound "perfect" and others may not
E26