Related Manuals for Jensen JTA-220A
Summary of Contents for Jensen JTA-220A
-
Page 1: User Manual
AM/FM STEREO TURNTABLE JTA-220A USER MANUAL PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAINTHIS BOOKLET FOR FUTURE REFERENCE. -
Page 2: Important Safety Instructions
WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. - Page 3 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
-
Page 4: Dear Jensen® Customer
The serial number of this product is found on its bottom cover. You should note the serial number of this unit in the space provided as a permanent record of your purchase to aid in identification in the event of theft of loss. Model Number: JTA-220A Serial Number: ________________ PROTECT YOUR FURNITURE!! This system is equipped with non-skid rubber ‘feet’... -
Page 5: Power Source
POWER SOURCE POWER CONNECTION This unit is designed to operate only on normal 120V ~ 60Hz AC house current. Plug the AC power cord into a household outlet AC source. ATTENTION: Operating this unit from any other power source may cause damage to unit and such damage is not covered by your warranty. -
Page 6: Tuner Operation
This unit should not be connected to speakers with an impedance of less than 8 ohms, otherwise damage may result to the unit. HEADPHONE JACK (PHONES) This unit will accept stereo headphones (not included) with a 1/8” plug and an impedance of 32 ohms or greater. -
Page 7: Care And Maintenance
Do not turn or stop the Turntable platter manually. Moving or jarring the Turntable platter without securing the Tone Arm Clamp could result in damage to the Tone Arm or Stylus. CARE & MAINTENANCE Power Button After using the unit, switch off the power by releasing the POWER BUTTON. Cleaning the Unit To clean, simply wipe with soft clean damp (never wet) cloth. - Page 8 Our obligation under this warranty is the repair or replacement of the defective unit or any part thereof, except batteries, when it is returned to the SPECTRA Service Department, accompanied by proof of the date of original consumer purchase, such as a duplicate copy of a sales receipt. You must pay all shipping charges required to ship the product to SPECTRA for warranty service.
Need help?
Do you have a question about the JTA-220A and is the answer not in the manual?
Questions and answers