Honda RIDGELINE 2019 Owner's Manual page 61

DRIVING
Turning the System On or Off
n
1. Press the MAIN button. LKAS
appears in the MID.
2. Press the LKAS button. Lane
outlines appear in the multi-
information display. Dotted lane
lines turn solid when the system
activates.
3. Press the MAIN button or the LKAS
button to turn the system off.
Important Safety Reminder
n
LKAS is for your convenience only. It is not a substitute for your vehicle
control. The system does not work if you take your hands off the steering
wheel or fail to steer the vehicle.
Do not place an object on the top of the instrument panel. It may reflect onto
the windshield and prevent the system from detecting lane lines properly.
Road Departure Mitigation (RDM)
Alerts and helps to assist you if the system determines a possibility of your
vehicle unintentionally crossing over detected lane markings while driving
between 45-90 mph (72-145km/h).
114 |
*1
*1 - If equipped
If your vehicle is getting too close to
detected lane markings without a turn
signal activated, a message appears in the
multi-information display. Steering wheel
torque and vibrations are applied to help
your vehicle stay in the lane.
Braking may also be applied if the lane
lines are solid and continuous.
If the system operates several times
without detecting driver response, the
system beeps to alert you.
Turning the System On or Off
n
Press the RDM button to turn the
system on or off. A green indicator
appears on the button when the system
is on.
Changing Settings
n
Determine the warning timing.
1. From the HOME screen, select
Settings.
2. Select Vehicle.
3. Select Driver Assist System Setup.
4. Select Road Departure Mitigation
Setting.
5. Select from the options.
6. Press Save.
Important Safety Reminder
n
The RDM system has limitations. Over-reliance on it may result in a
collision. It is always your responsibility to keep your vehicle within the
driving lane.
DRIVING
| 115