Download Print this page

Honda RIDGELINE 2019 Owner's Manual: Fuse Locations

Hide thumbs

Advertisement

HANDLING THE UNEXPECTED
3. Raise the vehicle, using the jack
handle bar and the jack handle, until
the tire is off the ground.
The vehicle can easily roll off the jack, seriously injuring anyone
underneath.
Follow the directions for changing a tire exactly, and never get under the
vehicle when it is supported only by the jack.
Do not use the jack if it doesn't work properly. Call your dealer or a
professional towing service.
The following instructions must be followed to use the jack safely:
• Do not use the jack with people or luggage in the vehicle.
• Use the jack provided in your vehicle. Other jacks may not support the
weight (load) or fit the jacking point.
• Do not use while the engine is running.
• Use only where the ground is firm and level.
• Use only at the jacking points.
• Do not get in the vehicle while using the jack.
• Do not put anything on top of or underneath the jack.
Replacing the Flat Tire
n
1. Remove the wheel nuts and flat tire.
134 |
2. Mount the compact spare tire.
Replace the wheel nuts and lightly
tighten them.
3. Lower the vehicle and remove the
jack. Tighten the wheel nuts in the
order indicated in the image. Go
around, tightening the nuts, two to
three times in this order. Do not
overtighten the wheel nuts.
If you drive with the spare tire installed, the low tire pressure/TPMS
indicator appears. The indicator stays on until a regular tire is installed and
the TPMS system is recalibrated.
Storing the Flat Tire
n
1. Remove the cap using a cloth-
wrapped, flat-tipped screwdriver.
2. Place the spacer cone on the flat
tire's wheel center, then mount the
wheel using the wing bolt.
3. Store the jack in the tire tray using
the strap. Close the tire tray and
tighten the holding bolts.
4. Store the center cap and tool kit in
the in-bed trunk.
Loose items can fly around the interior in a crash and can seriously injure
the occupants. Store the wheel, jack, and tools securely before driving.

Fuse Locations

If any electrical devices are not working, turn the vehicle off and check to see if
any applicable fuse is blown. Fuse locations are shown on the fuse box cover.
Locate the fuse in question by the fuse number and box cover number.
HANDLING THE UNEXPECTED
| 135

Advertisement

Comments to this Manuals

Symbols: 0
Latest comments: