Telephone operation
Analog corded 2-line - A1220
Using the corded handset and the telephone base
Receive a call
The telephone rings and the MESSAGE WAITING
To answer a call using the corded handset:
To answer a call using the telephone base:
Place a call
On the telephone base, lift the corded handset, or press LINE 1, LINE 2, or
End a call
Place the corded handset in the telephone base, or press
Switch a call between the corded handset and the telephone base speakerphone
•
To switch from the corded handset to the telephone base speakerphone, press
•
To switch from the telephone base speakerphone to the corded handset while it is not on the handset cradle, press
/SPEAKER
•
To switch from the telephone base speakerphone to the corded handset while it is resting on the handset cradle, lift the corded
Share a call
To share a call:
Speaker
To use the speakerphone:
•
When the telephone is idle, press
•
/SPEAKER
Volume
To adjust the ringer volume:
When the telephone is idle, slide the RINGER VOL
To adjust the listening volume:
+/- VOLUME
Call waiting
When you hear the call waiting tone during a call, press FLASH
Press FLASH
Mute
To mute the microphone:
MUTE
other end will not be able to hear you when the MUTE
Press MUTE
/SPEAKER
LINE 1 or LINE 2
/SPEAKER
MUTE
MUTE
23
23
/SPEAKER
/SPEAKER
/SPEAKER on the telephone base, then place
LINE 1
LINE 1
LINE 1
LINE 1