VTech A1100 Master User Manual page 34

Appendix
Troubleshooting
Cordless telephone
The telephone does not work at all.
•
•
• Make sure the battery is installed and charged correctly (pages 13 and 14
•
•
•
•
•
There is no dial tone.
•
• Move the cordless handset closer to the telephone base or adjust the setting of RF transmission power (page 21
•
•
I cannot dial out.
•
•
•
•
The LOW BATTERY LED illuminates on the cordless handset.
•
• Remove and install the battery again and use it until fully depleted, then charge the cordless handset in the telephone base or
•
The battery does not charge in the cordless handset or the battery does not accept charge.
•
•
•
The CHARGE LED is off
•
•
The CHARGE LED is off.
• Clean the charging contacts on the cordless handset, telephone base and charging base each month with a pencil eraser or a dry
•
•
The telephone does not ring when there is an incoming call.
•
•
• Adjust the setting of RE transmission power (page 21
•
• Other electronic products such as HAM r
installing your phone as far away as possible from these types of electronic devices
•
CHARGE
page 14
p
31 31 31
LOW BATTERY
CHARGE
LOW BATTERY