Advertisement
Oxygen Concentration
The VisionAire 3 & 5 will produce oxygen at 90% (+5.5/-3%) at all flow rates.
The VisionAire 2 will produce oxygen at 95% (+0.5/-3%) up to 1 LPM, and at 90% (+5.5/-3%) between 1 LPM and 2 LPM.
CAIRE recommends testing the oxygen concentration upon delivery to the patient and at periodic intervals set by the equipment provider. The
provider may check the concentration as frequently as required.
Hour Meter
The LCD hour meter is clearly visible under the flow meter on the left of the front panel.
The hour meter is dual function. The first mode tracks the total cumulative hours. This listing cannot be reset. It also has a second mode to
calculate accumulated hours. It is designated by "TMR1" on the hour meter and can be reset.
Toggle between the total cumulative hours and accumulated hours by pressing the pin-hole button on the hour meter. On the TMR1 screen,
you can re-set the accumulated hours counter by pressing and holding the pin-hole button for 3 seconds.
Alarms
Condition
Alarms
No Power
Low O2 Concentration**
Low Pressure
High Pressure
High Temperature
No Flow
**Only on units with optional Oxygen Monitor**.
CAIRE Inc. reserves the right to discontinue its products, or change the prices, materials, equipment, quality,
descriptions, specifications and/or processes to its products at any time without prior notice and with no further
obligation or consequence. All rights not expressly stated herein are reserved by us, as applicable.
Audible Indicator
1 Beep
2 Beeps
3 Beeps
4 Beeps
5 Beeps
6 Beeps
Go to www.CAIREmedical.com for more information.
Visual Indicator
-
Yellow Light
-
-
-
-
Copyright © 2014 Chart Industries ML-CONC0059 B
Advertisement
