Description Of Controls Connection To Pc - Philips 150S4FG/00 Service Manual

Front View
UP and DOWN buttons are used when adjusting the OSD of
your monitor
LEFT and RIGHT buttons, like the UP and DOWN buttons, are
also used in adjusting the OSD of your monitor.
BRIGHTNESS hotkey. When the UP and DOWN arrow buttons
are pressed, the adjustment controls for the BRIGHTNESS will
show up.
OK button which when pressed will take you to the OSD
controls.
POWER button switches your monitor on.
Automatically adjust the horizontal position,
vertical position, phase and clock setting.
Connection to PC
Please follow the steps to connect your LCD Monitor to PC.
1) Plug the power cord into monitor firmly
Note:
If you use an Apple Macintosh, you need to connect the special
Mac adapter To one end of the monitor signal cable
2) Connect to PC
(a) Turn off your computer and unplug its power cable.
(b) Connect the monitor signal cable to the video connector on the back
of your computer.
(c) Plug the power cord of your computer and your monitor into a nearby
outlet.
(d) Turn on your computer and monitor. If the monitor displays an image,
150S4 LCD 5
Go to cover page