Wiring Precautions - Mitsubishi Electric A1SJ71AP23Q User Manual

[WIRING PRECAUTIONS]

● Be sure to shut off all phases of the external power supply before installation
or wiring.
Failure to do so may result in an electric shock or damage to the product.
● Properly solder a connector for coaxial cable.
Failure to do so may cause malfunction.
● Be careful to prevent foreign matter such as dust or wire chips from entering
the module.
Failure to do so may cause a fire, failure or malfunction.
● Be sure to place the communication cables or power cables in a duct or clamp
them.
If not, dangling cables may swing or inadvertently be pulled, resulting in
damage to the module or cables, or malfunctions due to poor cable contact.
● When disconnecting a communication cable or power cable, do not pull it by
holding the cable part.
To disconnect the cable, hold its connector that is plugged into the module.
Loosen screws for a terminal block before disconnecting a cable for
connecting terminal block.
Pulling the cable part with the cable still connected to the module may
damage the module and/or cable, or cause malfunctions due to poor cable
contact.
WARNING
CAUTION
A-4