AT&T SYSTEM 25 User Manual page 38

Park (Contd)
5. If the call is for someone else, dial or page that
person. Tell him to pick up the call by dialing *8
followed by your attendant PDC (not 0).
Hang up.
6.
Note: If the parked call is not picked up within 2
minutes, it will return to the console on the <LOOP>
button where it is held. Answer it as you would any
incoming call.
Picking Up a Parked Call
1. Lift the handset and listen for a dial tone.
2. Dial *8.
3. Dial the PDC or access code on which the call is
parked.
Typical Displays for Calls Parked on a Selector Console:
The following example is an incoming trunk call parked on
801. The display shows the Call Park extension number.
A returning parked call is displayed on both screens. Screen
1 Indicates that the returning call was parked on 801:
34
8 0 1 P a r k
} 8 0 1 P a r k
Continued
3
3