Inspect - AT&T SYSTEM 25 User Manual

Inspect

The Inspect mode allows you to use your console display to
get the folIowing information:
• The PDC and associated name for a call on hold or
ringing at a <LOOP> button.
• The number of trunks available in a group of trunks
represented by a <FACILITY> button.
• The number or code stored on a <REP DIAL>, <LAST
# DIALED>, <DSS>, or <FLEX DSS> button.
In the Inspect mode, your console is unavailable to incoming
calls.
Getting Information
1. Enter the Inspect mode by pressing <INSPECT>. Do
not go off-hook.
2. To display identification information about a held or
ringing call, press the <LOOP> button of the call. The
display is the same as the one that appeared when the
call was originated or when it first arrived at the
console.
Typical Display:
3 2 2 S i s o l a k , W
Continued
8
29