Inspect - AT&T System 25 User Manual

Inspect

The inspect mode allows you to use your console display to get
the following information:
The extension number and associated name for either a call
on hold or a call ringing at a
The number of trunks available in a group of trunks
represented by a
The number or code stored on a
or button.
FLEX DSS
The name of the feature assigned to any other button.
In the Inspect mode, your console is unavailable to new
NOTE:
incoming calls. You also will
handling procedures (such as
etc.).
Using Inspect
Press .
1
INSPECT
Press the button you want to inspect.
2
Deactivating Inspect
When you do any of the following, you automatically deactivate
the Inspect feature:
Press again;
1
INSPECT
Hang up the handset after being off-hook, lift the handset
2
after-being on-hook, or press an idle
or
Allow the display to be idle for 15 seconds.
3
28
LOOP
button.
FACILITY
not be able to perform call-
hold, transfer, answering a call,
button.
,
REP DIAL LAST # DIALED
button ;
LOOP
,