Advertisement
11) First, fully assemble the water system components in the order shown in Figure 10 without gluing
anything together. Assemble the water system parts to the ladder to ensure that everything fits
before proceeding. Be sure that the ball valve is properly centered in the recess of the ladder.
12) Attach the pipe clamps to the ladder as shown in Figure 10, detail B.
13) Use PVC primer and glue to permanently assemble the parts together as in step 11.
14) Glue the top end of the PVC hose into the fitting in the ladder.
15) Use the pipe straps to fasten the ball valve into the ladder recess as shown in Figure 11, detail A.
16) Insert the hose into the hose clamps by firmly pushing the hose into the back of the clamp.
(20)
(15)
(13)
(11)
GLUE TO FITTING IN LADDER
(22)
(14)
(11)
9
Fig. 10
Fig. 11
Advertisement
