Download Print this page
Sangamo Choice Rstat 3 Installation & User's Instructions

Sangamo Choice Rstat 3 Installation & User's Instructions

2 wire, battery powered

Advertisement

Quick Links

The Choice Rstat 3 room thermostat has been designed to bring you
comfort and energy economy.
In addition to OFF/ON control the unit provides the option to regulate
your heating system at 2 temperature levels:
• Comfort
• Economy
Features
• LCD display shows room temperature
• OFF/ON mode selectable
• Comfort/Economy mode selectable
• Frost protecton
• Battery low indication
• Large easy to adjust dial

Technical Data

Power supply:
Contact rating:
Power reserve:
Temperature adjustment range:
Temperature frost protection:
Temperature display range, scale:
Operating temperature:
Storage temperature:
Switching differential:
Protection rating:
Wire size:
Dimensions:
Complies with:
Technical Helpline: 01475 745131
SERVICE AND WARRANTY
Your product is not user serviceable. PLEASE DO NOT TRY TO DISMANTLE THE UNIT.
This product is guaranteed by your supplier for 5 years from the date of manufacture. If it should become
SERVICE AND WARRANTY
defective please contact your installer or supplier for a replacement unit or visit www.sangamo.co.uk/returns
Your product is not user serviceable. PLEASE DO NOT TRY TO DISMANTLE THE UNIT.
This product must meet Waste Electronic and Electrical Equipment Regulations (WEEE) for suitable environmental
become defective, please contact your installer or supplier for a replacement unit or visit www.sangamo.co.uk/returns.
recycling, recovery and/or disposal. End of life products should be handled in line with local regulations.
CUSTOMER CARE POLICY
Alternatively return end of life product to Sangamo for correct disposal.
As part of Sangamo's continuous improvement program, the Company operates a Customer Care Policy.
CUSTOMER CARE POLICY
This means that we welcome your comments and complaints, as it can help us to improve our services to you,
our customer.
As part of Sangamo's continuous improvement program, the company operates a Customer Care policy. This
means we welcome your comments and complaints, as it can help us to improve our services to you, our
Due to our policy of continuous product improvement and development, the specifications in this guide may be subject to change without prior notice.
customer.
Due to our policy of continuous product improvement and development, the specifications in this guide may be
subject to change without prior notice.
143729 Issue E
CHOICE RSTAT 3
INSTALLATION / USER INSTRUCTIONS
DIGITAL ROOM THERMOSTAT
(2 WIRE, BATTERY POWERED)
2 Alkaline batteries 1.5V (type AA)
3A, 250Vac.
(Volt free changeover contact)
1 year
o
5-30
o
5
C (Non adjustable)
3 to 51
0 to 50
10-60
+/- 1
IP21
0.5-1.5mm
86mm x 86mm x 32mm
EN60730-1, EN60730-2-9, EMC directive 2004/108/EC,
LVD directive 2006/95/EC
Sangamo Limited, Industrial Estate, Port Glasgow, Renfrewshire PA14 5XG
Tel: 01475 745131
Email: enquiries@sangamo.co.uk
C
o
o
C, 1
C
o
C
o
C
o
C
2
This product is guaranteed by your supplier for 5 years from the Date of Manufacture. If it should
Fax: 01475 744567
Web: www.sangamo.co.uk
If you have a problem or
require any further information
please contact us:
01475 745131
Sangamo Limited
Industrial Estate, Port Glasgow,
Renfrewshire, PA14 5XG
Tel 01475 745131
Email: enquiries@sangamo.co.uk
Web: www.sangamo.co.uk
WEE/JH0069TY
143729_D

Advertisement

loading

Summary of Contents for Sangamo Choice Rstat 3

  • Page 1: Technical Data

    This product must meet Waste Electronic and Electrical Equipment Regulations (WEEE) for suitable environmental become defective, please contact your installer or supplier for a replacement unit or visit www.sangamo.co.uk/returns. recycling, recovery and/or disposal. End of life products should be handled in line with local regulations.
  • Page 2 Installation User Instructions This unit must be installed by a suitable competent person in ac- Display cordance with the latest IEE wiring regulations. The LCD displays actual room temperature until the setting dial Fig. (1) is moved. Setting the temperature Turn setting dial to required temperature. The selected temperature will ‘flash’ in the LCD to signify it is showing the set temperature. After a short period the display stops flashing and shows actual room temperature. Terminal cover Thermostat status (not shown) A flame symbol will be lit whenever the thermostat is calling for...