Problem Solving Guide; Messages In The Display - Miele CM5500 Operating Instructions Manual

Problem solving guide

With the help of the following guide, minor faults in the performance of the
appliance, some of which may result from incorrect operation, can be remedied
without contacting Miele. This will save you time and money because you won't
need a service call.
Please note that a call-out charge will be applied to unnecessary service visits
where the problem could have been rectified as described in these operating
instructions.

Messages in the display

Error messages must be confirmed with OK, otherwise the message may
reappear in the display even though the problem has been remedied.
Follow the instructions which appear in the display to remedy the problem.
If the fault message appears again in the display, contact Miele.
Problem
F1, F2,
F80, F82
F41, F42, F74, F77, F235,
F236
F10, F17
60
Possible cause and remedy
There is a fault inside the appliance.
 Switch the machine off with the On/Off  sensor.
Wait for approx. 1 hour before switching it back on
again.
There is a fault inside the appliance.
 Switch the machine off with the On/Off  sensor.
Wait for approx. 2 minutes before switching it back
on again.
No water or very little water is being drawn in.
 Remove the water container, fill it with fresh tap
water and replace it.
 Carefully clean the surface the water container sits
on, and the housing walls adjacent to the water
container. Dry the surfaces.