Water Hardness; Display Brightness; Volume; Factory Default - Miele CM5500 Operating Instructions Manual

Water hardness

Information regarding water hardness is
given in the "Water hardness" section of
this booklet.

Display brightness

Change the display brightness using
the arrow sensors .

Volume

You can set the volume of buzzer and
keypad tones using the arrow
sensors .
Useful tip: To switch off the tones,
touch the  arrow sensor until all of the
segments are empty and
appears in the display.

Factory default

You can reset the settings back to the
ones which were set when the coffee
machine was delivered - the factory
default settings.
The number of drinks and the appliance
status (No. of portions until appliance
needs descaling, ... brew unit needs
degreasing) cannot be reset.
Please refer to the "Overview of
available settings" chart for the factory
settings which are indicated by *.
The following settings will not be
reset:
– Language
– Profiles and their drinks
Switched off
Showroom programme (Demo
mode)
Do not activate this function for
domestic use.
The appliance can be presented in
Miele Experience Centres or retail
stores with the
Showroom programme
function. The lighting will come on but
drinks cannot be dispensed and other
actions cannot be carried out.
If you activate the Demo mode, you
cannot switch the appliance off with
the On/Off sensor .
Settings
43