Operating Environment; Device Connection; Ip Camera Connector Layout (Where Present) - urmet domus UFO 4K 1093/185FE User Manual

Ip h.265 fish eye cameras
Table of Contents

Advertisement

3.3

OPERATING ENVIRONMENT

Operating system: Windows 7/Windows 8/Windows 2008 (32/64-bit), Windows 2003/Windows XP/Windows 2000 (32-bit)
CPU: Intel Core Duo II processor or higher
Memory: 1G or higher
Video memory: 256M or higher
Display: 1024 × 768 or higher resolution
Internet Explorer 6.0 or later
4

DEVICE CONNECTION

The IP camera can be connected in two ways:
Connection to a PC
Connect the IP camera to the PC using a direct network cable, with the power input connected to a 12VDC
adaptor, and enter the IP addresses of the PC and the camera in a network segment. The IP camera will
communicate with the PC within one minute after being switched on if the network is working properly.
Connection to a router/switch
This solution is more commonly used in connecting the IP camera to Internet; in this case, the camera and PC are
connected to the LAN ports of a router/switch, with the camera gateway set to the IP address of the router.
4.1

IP CAMERA CONNECTOR LAYOUT (WHERE PRESENT)

1.
BNC Interface: Local video signal output.
2.
Audio Output Interface: RCA female head (white), can connect with external devices, such as speakers.
3.
Audio Input Interface: RCA female head (red), can connect with input devices, such as a microphone.
4.
RJ45 Interface (Network Interface): Connector for a RJ45 network cable.
DS1093-582
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ufo 5m 1093/186bnCanister 5m 1093/187c

Table of Contents