Front Rack - Bike Friday Pocket Rocket Manual

Accessories: Front Rack

1. Front Rack

The front rack consists of
two mirror image sides, a
long cross bar, and assorted
bolts and spacers. The cross
bar uses two 6mm bolts. The
lower mount uses two short
5mm bolts and spacers; the
upper mount uses two long
5mm bolts and spacers. Look
at the mounting eyelets on the rack. The recessed side of the eyelets
face out and are for the bolt heads. The flush side faces in.
2. Mount Cross Bar
Select either side of the rack,
the cross bar and one 6mm
bolt. Insert the bolt through
the recessed side of the eye-
let near the ball-stop on top
of the rack. Screw the bolt
loosely into the cross bar.
3. Mount Other Rack Side
Insert the remaining 6mm
bolt through the other rack
side and loosely thread into
the cross bar. The rack should
now resemble Figure 3.
42
www.bikefriday.com
Cross Bar
Spacers
Fig. 1 Front rack parts.
Fig. 2 Mount cross bar.
Fig. 3 Attach other side of rack.
800-777-0258 • +1-541-687-0487
Long
& Bolts
Short
Spacers
& Bolts