Assembly: Unpacking - Bike Friday Pocket Rocket Manual

Assembly: Unpacking

1. Open The TravelCase
Start by removing some of
the obviously loose items
from the case
water bottles, accessible col-
ored felt bags, trailer wheels,
the plastic pouch with extra
materials, and so on. Put the
accessories such as racks and
trailers out of the way for
now.
NOTE: If you did not purchase a TravelCase ™ these instructions
will still help you unpack your Bike Friday from the box.
2. Crush Protector
The crush protector is a PVC
dowel with a couple of flat
caps on the ends. This piece
is a critical bit of packing
material: it spans the case so
that luggage dropped on top
of your bike is supported by
the dowel and not your bike.
The caps are lightly pressed
on—just pull the top cap off. Don't worry if the dowel comes out
and the bottom cap is still in the case.
3. Remove Wheel & Bars
With the crush protector
removed, put the front wheel
nearby. The handlebars will
be in the left side of the case.
Pull them out, and let them
drape by the attached cables
over the left side of the case.
800-777-0258 • +1-541-687-0487
including
Fig. 1 The fully equipped travel bicycle.
Fig. 2 Remove crush protector.
Fig. 3 Remove front wheel and bars.
www.bikefriday.com
9