Accessories: Traveltrailer - Bike Friday Pocket Rocket Manual

Accessories: TravelTrailer

1. Trailer Parts
If you purchased a Travel-
Trailer with your bike, you
should have
wheels and two yellow felt
bags with the tongue and
axle. The bottom of your
TravelCase should
three holes drilled in it if you
ordered the trailer with your
bike. If you ordered the TravelTrailer system separately, you will
need to find the three dimple marks in the bottom of your case and
drill them through with a ¼" drill.
2. Connect Axles
In the smaller yellow felt bag
there should be two axles and
a T-bar. Slip the open ends of
the axles over the "T" of the
T-bar. Each axle will have a
threaded stud with a thumb
nut and two flat washers.
Remove the thumb nuts and
one of the washers from each
stud (leaving one washer over each stud post).
3. Attach Trailer Axle
With the case open and
standing on its left side,
attach the axle assembly by
slipping the two threaded
studs through the two holes
in the right side of the case.
The end of the T-bar should
be pointing at the third hole
in the case.
36
www.bikefriday.com
two trailer
have
Fig. 1 Travel Trailer parts.
Fig. 2 Assemble trailer axle.
Fig. 3 Attach trailer axle.
800-777-0258 • +1-541-687-0487