Whirlpool GM8155XJQ Job Aid page 32

4. To remove the switch actuators:
a) Remove the two inner door frame
screws.
Door Frame Screw
(1 of 2)
b) Start at the lower right corner of the
door and unclip the locking tabs along
the bottom and right sides of the inner
door frame while you lift the frame.
c) When the inner door frame is free of the
tabs, slide the frame out of the 3 top
holders and remove it.
Slide Out Of Holders
Unclip 3 Tabs
Inner Door Frame
Unclip
3 Tabs
Start Here
2-20
d) Remove the end of the spring from the
actuators.
Switch Actuators
Unhook Spring
e) Unhook the actuators from the slots in
the inner door frame.
Hook
Hook