Intrusion Switch; Removing Intrusion Switch - Dell OpriPlex XE3 Service Manual

5 Close the front panel
6 Install the:
a front bezel
b side cover
7 Follow the procedure in

Intrusion switch

Removing intrusion switch

1 Follow the procedure in
2 Remove the:
a side cover
b front bezel
3 Open the front panel door.
4 To remove the intrusion switch:
a Press the latch and disconnect the intrusion switch cable from the connector on the system board and pull the cable [1].
b Unroute the intrusion switch cable from the fan grommet [2].
c Slide the intrusion switch and push it to remove from the computer [3].
42 Disassembly and reassembly
door.
After working inside your
Before working inside your
computer.
computer.