Installing the 2.5–inch hard drive into the drive bracket
1
Align the hard drive to the side of the hard drive bracket, and pull the other end tabs to insert the pins on the bracket into the hard
drive.
2
Insert the hard drive into the hard drive bracket and press the hard drive until it clicks into place.
3
Install the:
a
2.5–inch drive assembly
b
front bezel
c
cover
4
Follow the procedure in
Optical drive
Removing optical drive
1
Follow the procedure in
2
Remove the:
a
side cover
b
front bezel
3
Open the
front panel
door.
4
To remove the optical drive assembly:
a
Disconnect the data cable and power cable from the connectors on the optical drive [1].
After working inside your
computer.
Before working inside your
computer.
Disassembly and reassembly
25