Battery Status Lights - Dell OpriPlex XE3 Service Manual

Amber LED state
3,2
3,3
3,4
3,5
3,6
3,7

Battery status lights

If the computer is connected to an electrical outlet, the battery light operates as follows:
Alternately blinking An unauthenticated or unsupported non-Dell AC adapter is attached to your laptop. Re-plug battery connector,
amber light and replace battery if the issue reoccurs.
white light
Alternately blinking Temporary battery failure with AC adapter present. Re-plug battery connector, replace battery if the issue
amber light with reoccurs.
steady white light
Constantly blinking Fatal battery failure with AC adapter present. Fetal battery, replace the battery.
amber light
Light off Battery in full charge mode with AC adapter present.
White light on Battery in charge mode with AC adapter present.
White LED state System state
BIOS state 5
BIOS state 6
BIOS state 7
BIOS state 8
BIOS state 9
BIOS state 10
Notes
video sub sytem config or failure.
BIOS to eliminate 0101 video
code.
BIOS Post code (Old LED
pattern 0110) Combine storage
and USB config or failure. BIOS
to eliminate 0111 USB code.
BIOS Post code (Old LED
pattern 1000) MEM config, no
memory detected.
BIOS Post code (Old LED
pattern 1001) Fatal Motherboard
error.
BIOS Post code (Old LED
pattern 1010) Mem config,
modules incompatible or invalid
config.
BIOS Post code (Old LED
pattern 1011) combine "Other
pre-video activity and resource
configuration codes. BIOS to
eliminate 1100 code.
BIOS Post code (Old LED
pattern 1110) Other pre-post
activity, routine subsequent to
video init.
Troubleshooting 69